Main reasons and solutions for smoke emission from the exhaust port of an oil fume purifier


Release time:

2018-06-14

Secular Bailey range hood Beijing range hood integrated machine

Main reasons and solutions for smoke emission from the exhaust port of an oil fume purifier

Oil smoke purifier Malfunctions often occur due to installation, especially for first-time users. How can we avoid these malfunctions? Today, we'll show restaurant users how to handle them. Let's take a look at the causes and solutions.

Oil smoke purifier Main causes of smoke from the exhaust port:

Cause 1: Excessive oil stains on the electric field plates of the oil smoke purifier, debris inside the electric field, or deformation of the electric field, leading to electric field discharge, thus reducing or eliminating the oil smoke purification effect.

Solution: Remove the electric field for cleaning, remove impurities, or restore the deformed electric field.

Cause 2: Oil smoke purifier Improper matching of equipment airflow. If the airflow is too large, the kitchen oil smoke passes through the equipment too quickly, bypassing the purifier without being processed, thus reducing the purification effect. If the airflow is too small, and the kitchen oil smoke volume is large, exceeding the equipment's processing limit, white smoke will appear at the exhaust port.

Solution: Match the oil smoke purifier with the appropriate airflow.

Cause 3: Mismatched fan power. The fan, as an auxiliary device for kitchen oil smoke purifiers, plays a crucial role. Excessive fan power will lead to excessive wind speed in the pipeline, while insufficient fan power will lead to slow wind speed, both of which will negatively impact purification.

Solution: Replace with a fan of appropriate power.

Cause 4: Debris in the pipeline. If there is debris in the pipeline, such as debris accidentally left inside during installation, it will increase pipeline resistance, affect pipeline wind speed, and thus reduce purification efficiency.

Solution: Clean the debris in the pipeline promptly and keep the pipeline clean.

Cause 5: Unreasonable installation can lead to white smoke in the exhaust. Unreasonable installation, lack of air distribution nets at the inlet and outlet, short pipe spacing, multiple bends, unreasonable diameter changes, etc., can all cause smoke to come out of the exhaust port.

Solution: Complete the installation work correctly and check to prevent low purification efficiency due to installation problems.

The above is a brief introduction on how to avoid smoke from the exhaust port after installing an oil smoke purifier. We hope everyone can understand and avoid this to ensure the oil smoke purifier achieves the best purification effect.

Shenzhen Century Bailey mainly engages in independent research and development of large-scale catering industry Oil smoke purifier Oil smoke purifier Oil smoke purification equipment, Century Bailey Oil smoke purification integrated machine Our independently developed new generation of wet oil smoke purification integrated machines, UV photocatalytic oxidation oil smoke purifiers, and dynamic physical interception oil smoke purifiers meet the needs of different customers. It simplifies the traditional Oil smoke purification system, improves equipment reliability, and far exceeds national emission standards. Company website: www.szbailey.com